S13 Oil-Immersed Transformer

S13 oil-immersed transformer has adopted a series of major improvements in material, technology, and structure, so that the electrical performance of the product reaches the international advanced level compared to similar products. With the characteristics of high efficiency and low loss, it can save lots of power consumption and operation costs, thus has an obvious energy-saving effect. It is a new product promoted by the state and one of the most popular products for users.
1.Reasonable structure
The magnetic circuit of the winding core is tightly wound without air gap, and the length of the three magnetic circuits is the same and the shortest.The cross section of the core column is closer to the circle. These structural features make this kind of transformer have obvious advantages,such as material saving, high performance, low loss, low noise, three-phase magnetic circuit balance, less third harmonic, etc
2.Low loss and light weight
The magnetization direction of coil core is completely consistent with the rolling direction ,and there is no lap joint between the core layers. The magnetic flux is evenly distributed throughout the magnetic circuit, and there is no obvious high resistance region and no distortion of magnetic flux density at the joint. With the same material,the core loss of wound core decreases from 1.15 ~ 1.3 to 1.05 ~ 1.1 compared with laminated core.Only this can reduce the core loss by 10% ~ 20%.
3.Low noise
As the coil core is wound by siliconclosly and continuously on a special core winding machine without interruption,
So there is no joints and magnetic circle block, and there will be no magnetoresistance and continuous noise like laminated transformer.
4.High overload capacity the three-phase coils of the transformer are arranged in a "triangle" shape, like the picture below
There is a central natural channel among the coils, the temperature difference between the upper and lower iron yokes is about 30 ~ 40 ºC,which make strong convection and quickly takes away the heat generated by the transformer by natural circulation.Therefore, the winding and core of the transformer have good heat dissipation, low temperature rise and high overload capacity.
 

Staple Items	Annual Production Capability
Oil-immersed transformer	2.9 million kVA
Dry-type transformer	2.22 million Kva
Amorphous dry-type transformer	1.5 million
Amorphous oil-immersed transformer	2.28 million kVA
Pad-mounted transformer for wind power plant	509 sets
Pre-fabricated substation for wind power plant	472 sets
10kV pad-mounted transformer/pre-fabricated substation	560 sets
Arc suppression reactor earthing assembly	460 sets
Reactor	2.30 million kVA

Amidst the vast land of China and the majestic Taihang Mountains lies Anyang, Henan Province, located on the eastern foothills of the Taihang mountain range. It is one of the eight ancient capitals of China and home to an outstanding steel supply chain enterprise – GNEE GROUP.

GNEE GROUP, established in 2008 with a registered capital of 5 million yuan, has grown into a comprehensive steel supply chain enterprise after more than a decade of hard work and perseverance. It has five subsidiaries located in different countries and regions, including Anyang, Tianjin, Hong Kong, Zhengzhou, and Singapore, and its influence has reached out around the world.
 

 

FAQ
Q: Can your product be customerized?
A: Considering differences in voltage, frequency and other speciality of transformer product in different countries and regions,our product can be customerized according to your requirements.
Q: What is the price of shipping?
A: Depending upon the port of delivery, prices varies.
Q: What should provide to make custom transformer?
A: Technical drawing and specification documents are the best, or you can list key parameters for designing.
Q: Could I have your catalog and price list?
A: Price may change based on material market. Welcome to contact for accurate price via Made-in-China or company official website.